• Manufacturer and installer of oxygen generating systems

  • Over 20 years producing and supplying oxygen

  • Oxygen compressors with compression novel cooling system for oxygen out at low temperature

  • More than 30 years manufacturing electromedical equipment (respirators, CPAP, resuscitators tourniquets etc.)

Oxicomp 4

Oxygen Compressor micro-controlled

Low rpm and oil free

To fill in cylinders


  • Feed pressure according on model from 2 to 6 bar (29 to 87 psi)
  • Selectable filling pressure, maximum 200 bar (2,900 psi)
  • Maximum cylinder filling volume 7340 l/h (7,32 m3/h)
  • Fill in capacity in 24 hours 88 cylinders of 10 lit


Technical characteristics

Load pressure (selectable) 100 - 150 - 200 bar. (1450 – 2175 – 2900 psi)
Electricity power 230 - 400V - 50/60 Hz
Engine power 4 Kw three phase (4.02 HP)
Electricity consumption 4 Kw
RPM (very low) 24 rpm
Connection ¼ ʺ NPTF
Weigh 340 Kg
Dimensions (wheels 85 mm) Length 600 x Width 600 x High 1200 mm
Weigh packaged 394 Kg
Volume packaged 1,27 m3 (935 x 870 x 1570 mm)

Standard components

  • Electronic circuit
  • Incoming oxygen deposit
  • Electric box
  • Incoming pressure regulator
  • Geared motors
  • Pressure transducer
  • Lower piston
  • Upper piston
  • Safety valve
  • Decompression valve
  • Refrigeration elements
  • Antireturn Valve
  • Start/Stop Buttons
  • Refrigerant ventilator
  • Emergency Stop
  • Crank


The estimated lifespan for segments and o-rings at 200 bars is demonstrated to be 4000 hours. The lifespan of segments and o-rings of the first stage is considerably greater. For maintenance work we recommend to have a spare set of orings and segments and a spare module (upper piston and lower piston) for quick replacements in case of checks or possible breakdowns.

Recommended spare parts

  • Upper and Lower pistons
  • Set of lock washers

En el blog...

New container-based oxygen plant installation

New container-based oxygen plant installation

Monday, 06 March 2017

Ceimsa Electromedicina recently installed a new oxygen and medical-gas generating plant in León. The oxygen plant is installed in a prefabricated container and is the fifth installation of its kind we have made for León.

Highlights of our oxygen plants

Highlights of our oxygen plants

Friday, 16 September 2016

The oxygen plants and our on-site oxygen generating systems and medical air generating systems  is more reliable and cost-effective than the cryogenic technique, provided of course that the plant is manufactured and installed by specialists in this area, and that this is preceded by a plant study and project.


Ceimsa Location Map

Ceimsa S.L.

Poligono Mugazuri 6A
Tel.: + 34 948 13 17 76
Fax: + 34 948 12 44 70

Quality certifications

Quality certifications

Company strategic interest

Company strategic interest, Moderna proyect

Fondo Europeo de Desarrollo RegionalEsta entidad ha recibido una ayuda cofinanciada al 50% por el Fondo Europeo de Desarrollo Regional a través del Programa Operativo FEDER 20072013 de Navarra.