OXYGEN GENERATOR WITH AIR COMPRESSOR INCLUDED

  

Ceimsa manufactures PSA oxygen generating systems for medical and industrial applications, to satisfy a wide range of patients' respiratory tract needs (respiratory therapy) and for oxygen needs in health centres (oxygen supply stations). Our industrial oxygen generating systems (with litre output per minute to cubic metres per day) are used for commercial applications ranging from ozone generation and bioremediation to thermal oxidation, aquaculture and welding, etc.

Our PSA oxygen generating system makes it possible to separate oxygen from other gases after passing it through a molecular compound denominated Zeolite which, under pressure, retains the nitrogen molecules allowing the oxygen to pass through an outlet nozzle for consumption at a determined pressure. In this way the apparatus can be used for any application which requires oxygen by means of a flow regulator.

Our high-tech. and high performance oxygen generators offer numerous advantages which combine purity of oxygen with safety, comfort, silent operation and low electric consumption. Its aesthetic appearance and excellent characteristics are designed to adapt to the needs of the user. This type of generator is completely autonomous and is equipped with its own air compressors, therefore requiring no special installation. To set up an oxygen supply simply connect the oxygen outlet of the apparatus to your oxygen distribution system and the power cable to an earthed power point, switch on the generator and set the oxygen supply flow.

 Ceimsa generators provide easy operation and include vital visual and sound alarms (lack of power, high and low pressure, low concentration of oxygen, etc.) including a verification of the oxygen concentration. This model is designed to produce oxygen at an outlet pressure of 1,5 bars, to 94% ± 1.

 

CARACTERÍSTICAS

HCM 2003 (PSA)2-20L     

HCM 2003(PSA)2-25L        

Outlet flow

1,2 m3/h = 1.200 l/h = 20 l/min

1,8 m3/h = 1.800 l/h = 30 l/min

Oxygen concentration

94% ± 1

94% ± 1

Oxygen analyser

Included

Included

Outlet pressure

1,5 bar

1,5 bar

Supply voltage

220/230V (50/60 Hz).

380 V 50-60 Hz three phas + n.

Input power

2,5 Hp (1,8 Kw)

3 Hp (2,7 Kw)

Maximum noise level

Menos de 45 dB(A).

Menos de 60 dB(A).

Stabilisation time

10 minutes.

10 minutes.

Temperature limits

10÷43ºC  (50÷110ºF).

10÷43ºC  (50÷110ºF).

Oxygen outlet temperature

Ambient temp.+4ºC.

Ambient temp. +4ºC.

Dimensions

A. 500. A.980 P. 500 mm

A. 500. A.1.200P. 500 mm

Weight

108 Kg.

130 Kg.

Maintenance 

Simple

Simple

 

 

 

 

 

 

 

 

 

 

 

 

This equipment it is very economical as no specific maintenance is required; only periodical checks every 4000 hours of operation.

 
HOME   Call al Tel.: 34 948 130 115       info@ceimsa.es 

OUR PRODUCTS