MICRO-CONTROLLED
OXYGEN GENERATOR
HCM 2003 (PSA) 2 AND 4

Catalogue PDF  

The Micro-controlled Oxygen Generator HCM-2003 (PSA) 2 and 4, has been designed to separate oxygen from the air, after passing through a molecular compound called Zeolite which, under pressure, retains the nitrogen, allowing the oxygen to pass through. It is a completely independent module whose internal workings are electronically controlled by a microprocessor. 

This type of generator is completely autonomous and is equipped with its own air compressors, therefore requiring no special installation.  To set up an oxygen supply simply connect the oxygen outlet of the apparatus to your oxygen distribution system and the power cable to an earthed power point,  switch on the generator and set the oxygen supply flow.  

It is possible to use either individually or connected to other modules, in the same range, so as to increase the capacity, depending on the needs of the user. The module is very versatile in terms of its features, covering different needs, such as: Supply of hospital networks, supply of industrial networks filling cylinders under high pressure using our Compressor OXICOMP. 

Ceimsa generators provide easy operation and include vital visual and sound alarms (lack of power, high and low pressure, low concentration of oxygen, etc.) including a verification of the oxygen concentration.

Example installation:

These modules can be placed together, stacked one on top of the other or separate.
Examples offered as orientation.
Other possiblecombinations.